תיאור
חשוב לדעת – הנחיות להזמנת חלקי חילוף
חלק שכתוב באתר בהזמנה מראש , נמצא במחסן הראשי ולא בחנות .
אתם משלימים את ההזמנה ותקבלו את החלקים 3-8 ימי עסקים .
לאחר ביצוע ההזמנה אתם בוחרים אם במשלוח או באיסוף עצמי.
במשלוח תחויבו רק משלוח אחד על כל ההזמנה והמשלוח ישלח אליכם לכתובת שתתנו באתר .
איסוף עצמי זה ללא חיוב נוסף.
כדי לקדם את הכנת ההזמנה בבקשה לשלוח הודעה בוואצאפ על ביצוע הזמנה
לטלפון 054-4545040
ישנה אפשרות להביא את המכונית כדי שאנו נבצע את החלפת החלקים (כרוך בתשלום )
The Velineon® VXL-3s forward/reverse electronic speed control simplifies brushless technology with easy, built-in profiles. It sets up, operates,
and programs just like the Traxxas XL-5™ family of ESCs so there's no tricky new procedures to learn.
Traxxas' exclusive patented Training Mode™ is also included to limit full throttle to 50% for young or inexperienced drivers. For the most advanced users,
the VXL-3s is equipped with two-stage low voltage detection to allow LiPo battery use,
including powerful 11.1-volt 3S packs! The VXL-3s is manufactured by Traxxas to ensure the highest level of quality and support
and is backed by the Traxxas Lifetime Electronics Warranty.
Traxxas High-Current Connector*
The VXL-3s ESC is equipped with the patented Traxxas high-current connectors for restriction-free current flow.
Click here for more info about the patented Traxxas High-Current Connertor.
Assembled with Maxx® Cable (12-gauge wire)
This super-flexible, high-current, low-resistance 12-gauge, wire acts like a series of giant pipes,
flowing energy in and out of the VXL-3s electronic speed control and into the Velineon 3500 motor.
The patented Traxxas Connector combined with Maxx cable is a better engineered solution for extracting
all the power your battery has to give.
Velineon VXL-3s Waterproof Features
- Patented Traxxas High-Current Connector eliminates a common bottleneck and maintains pure,
unrestricted power flow from the battery to the brushless power system. - Built-in two-stage low voltage detection for Lithium Polymer (LiPo) battery use provides a clear
signal to the driver that the battery pack is nearing its minimum voltage threshold. - Widest range of battery options ranging from 4-cell NiMH packs all the way up to 3S LiPo battery packs (11.1 volt)
- The patented Training Mode™ is an exclusive Traxxas feature that reduces the overall power output of the VXL-3s by 50%,
making it easier for new or younger drivers to control their model. When they're ready, simply change profiles to unleash full-throttle action. - The EZ-Set® push-button setup operates and programs just like other Traxxas speed controls such as the XL-5.
This eliminates the need to learn a new set of procedures. - The VXL-3s is programmable with three drive profiles:
- Sport Mode – Fwd / Brake / Rev
- Race Mode – Fwd / Brake
- Training Mode**™ – 50% Fwd / Brake / 50% Rev
- Multi-color LED provides clear feedback
- Two-stage thermal shutdown protection protects the VXL-3s from overheating.
- Locked Rotor Protection™ prevents system damage by cutting power if the vehicle is stuck or the motor is bound.
- Battery Over-Voltage Protection™ causes the ESC to go into failsafe mode if the maximum input voltage is exceeded.
- Water resistent case design uses rubber seals and o-rings to protect against damage caused by water and moisture.
- Micro-fin aluminum heatsink dissipates heat.
- The built-in auxiliary fan output powers a snap-on accessory fan for increased cooling capacity during extreme use.
A handy clasp on the speed control case keeps the wire neatly in place until you are ready to use it. - Gold plated 3.5mm bullet connectors on 12-gauge Maxx® Cable flow full power to the motor without performance strangling resistance.
VXL-3s WATERPROOF ESC SPECIFICATIONS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Velineon Cooling fan (#3340)
(accessory item, sold separately)
The Velineon® VXL-3s Accessory Cooling Fan reduces ESC temperatures during extended operation for maximum power flow.
It securely clips onto the VXL-3s heatsink for easy installation. Wires are neatly routed thanks to the integrated connector clip.
Simply plug the accessory cooling fan into the Velineon VXL-3s accessory power connector and clip the fan onto the heatsink for increased cooling.